找回密码
 立即注册
  • QQ空间
  • 回复
  • 收藏

美亚CPC认证标准 CPC认证标准一览表 美国亚马逊CPC认证

美亚CPC认证标准 CPC认证标准一览表 美国亚马逊CPC认证 亚马逊儿童产品CPC认证标准 ASTM F2050-19 手持式婴儿背袋和旅行  ASTM F833-21
135 10588 137

美亚CPC认证标准 CPC认证标准一览表 美国亚马逊CPC认证-1.jpg

美亚CPC认证标准 CPC认证标准一览表 美国亚马逊CPC认证-2.jpg

美亚CPC认证标准 CPC认证标准一览表 美国亚马逊CPC认证-3.jpg

美亚CPC认证标准 CPC认证标准一览表 美国亚马逊CPC认证-4.jpg
16 CFR Part 1203Bicycle Helmet Safety Standard
16 CFR Part 1215Infant Bath Seats
16 CFR Part 1216Infant Walkers
16 CFR Part 1217Safety Standard for Toddler Beds
16 CFR Part 1218Safety Standard for Bassinets and Cradles
16 CFR Part 1219Safety Standard for Full-Size Cribs
16 CFR Part 1220Safety Standard for Non-Full-Size Cribs
16 CFR Part 1221Safety Standard for Play Yards
16 CFR Part 1222Safety Standard for Bedside Sleepers
16 CFR Part 1223Safety Standard for Infant Swings
16 CFR Part 1224Safety Standard for Portable Bed RAIls
16 CFR Part 1225Safety Standard for Hand-Held Infant Carriers
16 CFR Part 1226Safety Standard for Soft Infant and Toddler Carriers
16 CFR Part 1227Safety Standard for Carriages and Strollers
16 CFR Part 1228Safety Standard for Sling Carriers
16 CFR Part 1229Safety Standard for Infant Bouncer Seats
16 CFR Part 1230Safety Standard for Frame Child Carriers
16 CFR Part 1231Safety Standard for High Chairs
16 CFR Part 1232Safety Standard for Children's Folding Chairs and Stools
16 CFR Part 1233Safety Standard for Portable Hook-On Chairs
16 CFR Part 1234Safety Standard for Infant Bath Tubs
16 CFR Part 1235Safety Standard for Baby Changing Products
16 CFR Part 1237Safety Standard for Booster Seats
16 CFR Part 1238Safety Standard for Stationary Activity Centers
16 CFR Part 1239Safety Standard for Gates and Enclosures
16 CFR Part 1303Lead Paint Regulation
16 CFR Part 1500.18Banned toys and other banned articles intended for use by children
16 CFR Part 1500.19Misbranded toys and other articles intended for use by children
16 CFR Part 1500.48Technical requirements for determining a sharp point in toys and other articles intended for use by children under 8 years of age
16 CFR Part 1500.49Technical requirements for determining a sharp metal or glass edge in toys and other articles intended for use by children under 8 years of age
16 CFR Part 1500.50Test methods for simulating use and abuse of toys and other articles intended for use by children
16 CFR Part 1500.51Test methods for simulating use and abuse of toys and other articles intended for use by children 18 months of age or less
16 CFR Part 1500.52Test methods for simulating use and abuse of toys and other articles intended for use by children over 18 but not over 36 months of age
16 CFR Part 1500.53Test methods for simulating use and abuse of toys and other articles intended for use by children over 36 but not over 96 months of age
16 CFR Part 1500.82Exemption from full labeling and other requirements
16 CFR Part 1500.83Exemptions for small packages, minor hazards, and special circumstances
16 CFR Part 1501Small Parts Regulation
16 CFR Part 1505Electrically operated toys/articles
16 CFR Part 1510Rattles
16 CFR Part 1511Pacifiers
16 CFR Part 1512Bicycles
16 CFR Part 1513Children's Bunk Beds
16 CFR Part 1610Standard for the Flammability of Clothing Textiles
16 CFR Part 1611Flammability of Vinyl Plastic Film
16 CFR Part 1615Standard for the Flammability of Children's Sleepwear: Sizes 0 through 6X (FF 3-71)
16 CFR Part 1616Standard for the Flammability of Children's Sleepwear: Sizes 7 through 14 (FF 5-74)
16 CFR Part 1630Surface Flammability of Carpets and Rugs
16 CFR Part 1631Surface Flammability of Small Carpets and Rugs
16 CFR Part 1632Standard for the Flammability of Mattresses and Mattress Pads (FF 4-72, Amended)
16 CFR Part 1633Standard for the Flammability (Open Flame) of Mattress Sets
ANSI C78.377       Electric LamPS – Specifications for the Chromaticity of Solid-State Lighting Products
AS/NZS 2172-2013Cots for household use- Safety requirements
ASTM F404-20     Highchairs
ASTM F406-19     Non-Full-Size Baby Cribs/Play Yards
ASTM F833-21 Standard Consumer Safety Performance Specification for Carriages and Strollers
ASTM F963-17-4.3.5.1(2)Surface Coating Materials - Soluble Test for Metals
ASTM F963-17-4.3.5.2Toy Substrate Materials
ASTM F963-17-4.3.6Cleanliness of Liquids, Pastes, Putties, Gels, Powders, and Items of Avian Feather Origin
ASTM F963-17-4.3.7Stuffing Materials
ASTM F963-17-4.4Electrical/Thermal Energy
ASTM F963-17-4.5Sound Producing Toys
ASTM F963-17-4.6Small Objects
ASTM F963-17-4.7Accessible Edges
ASTM F963-17-4.8Projections
ASTM F963-17-4.9Accessible Points
ASTM F963-17-4.10  Wires or Rods
ASTM F963-17-4.11  Nails and Fasteners
ASTM F963-17-4.12  Plastic Film
ASTM F963-17-4.13  Folding Mechanisms and Hinges
ASTM F963-17-4.14  Cords, Straps, and Elastics
ASTM F963-17-4.15  Stability and Overload Requirements
ASTM F963-17-4.16  Confined Spaces
ASTM F963-17-4.17  Wheels, Tires, and Axles
ASTM F963-17-4.18  Holes, Clearances, and Accessibility of Mechanisms
ASTM F963-17-4.19  Simulated Protective Devices
ASTM F963-17-4.20.1Pacifiers with Rubber Nipples/Nitrosamine Test
ASTM F963-17-4.20.2Toy Pacifiers
ASTM F963-17-4.21  Projectile Toys
ASTM F963-17-4.22  Teethers and Teething Toys
ASTM F963-17-4.23.1Rattles with nearly spherical, hemispherical, or circular flared ends
ASTM F963-17-4.24  Squeeze Toys
ASTM F963-17-4.25  Battery-Operated Toys
ASTM F963-17-4.26   Toys Intended to Be Attached to a Crib or Playpen
ASTM F963-17-4.27 Stuffed and Beanbag-Type Toys
ASTM F963-17-4.28  Stroller and Carriage Toys
ASTM F963-17-4.30 Toy Gun Marking
ASTM F963-17-4.31 Balloons
ASTM F963-17-4.32 Certain Toys with Nearly Spherical Ends
ASTM F963-17-4.33 Marbles
ASTM F963-17-4.34 Balls
ASTM F963-17-4.35 Pompoms
ASTM F963-17-4.36 Hemispheric-Shaped Objects
ASTM F963-17-4.37 Yo-Yo Elastic Tether Toys
ASTM F963-17-4.38 Magnets
ASTM F963-17-4.39 Jaw Entrapment in Handles and Steering Wheels
ASTM F963-17-4.40 Expanding Materials
ASTM F963-17-4.41 Toy Chests
ASTM F977-18 Standard Consumer Safety Specification for Infant Walkers
ASTM F1004-21Expansion Gates and Expandable Enclosures
ASTM F1163-15Protective Headgear Used in Horse Sports and Horseback Riding
ASTM F1169-19Full-Size Baby Cribs
ASTM F1235-18Portable Hook-On Chairs
ASTM F1427-21Bunk Beds
ASTM F1447-18Helmets Used in Recreational Bicycling or Roller Skating
ASTM F1772-17Harnesses for Rescue and Sport Activities
ASTM F1774-20Climbing and Mountaineering Carabiners
ASTM F1816-18Drawstrings on Children's Upper Outerwear
ASTM F1821-19e1Toddler Beds
ASTM F1898-15Helmets for Non-Motorized Wheeled Vehicle Used by Infants and Toddlers
ASTM F1917-20e1Infant Bedding and Related Accessories
ASTM F1967-19Infant Bath Seats
ASTM F2012-18e1Stationary Activity Centers
ASTM F2040-18Helmets Used for Recreational Snow Sports
ASTM F2050-19Hand-Held Infant Carriers
ASTM F2085-19Portable Bed Rails
ASTM F2088-21Infant and Cradle Swings
ASTM F2167-19Infant Bouncer Seats
ASTM F2194-16e1Bassinets and Cradles
ASTM F2236-16aSoft Infant and Toddler Carriers
ASTM F2388-18Baby Changing Products for Domestic Use
ASTM F2549-14aFrame Child Carriers
ASTM F2613-21Children's Chairs and Stools
ASTM F2640-18Booster Seats
ASTM F2670-18Infant Bathtubs
ASTM F2906-19Bedside Sleepers
ASTM F2907-19Sling Carriers
ASTM F2923-14Consumer Product Safety for Children’s Jewelry
ASTM F3084-20Infant and Infant/Toddler Rockers
ASTM F3118- 17aInfant Inclined Sleep Products
CIE 13.3CRI
CIE 15Chromaticity coordinates
CIE 18.2Luminance
CIE 18.2The basis of physical photometry
CIE 63Spectral power distribution
CIE 84General conditions of luminous flux measurement; L2(AP)005 for cone luminous Flux
CIE 97Lamp survival factor
CPSC-CH-C1001-09.4Determination of Phthalates
CPSC-CH-E1001-08Lead in Children's Metal Jewelry; Lead in Children's Metal Products; Lead in Non-Metal Children's Products
CPSC-CH-E1001-08.1Lead in Children's Metal Jewelry; Lead in Children's Metal Products; Lead in Non-Metal Children's Products
CPSC-CH-E1001-08.2Lead in Children's Metal Jewelry; Lead in Children's Metal Products; Lead in Non-Metal Children's Products
CPSC-CH-E1001-08.3Lead in Children's Metal Jewelry; Lead in Children's Metal Products; Lead in Non-Metal Children's Products
CPSC-CH-E1003-09Lead Paint Regulation
CPSC-CH-E1003-09.1Lead Paint Regulation
EN 1130:2019Children's furniture - Cribs - Safety requirements and test methods
EN 1273-2020Child care articles - Baby walking frames - Safety requirements and test methods
EN 1888- 1:2018Childcare articles - Wheeled child conveyances - Part 1: Pushchairs and prams
EN 1888-2:2018Childcare articles - Wheeled child conveyances - Part 2: Pushchairs for children above 15 kg up to 22kg
EN 1930:2011Child use and care articles - Safety barriers – Safety requirements and test methods
EN 12221-
1:2008+A1:2013Child use and care articles - Changing units for domestic use Part 1: Safety requirements
EN 12221-
2:2008+A1:2013Child use and care articles - Changing units for d domestic use Part 2: Test methods
EN 12227:2010Playpens for domestic use - Safety requirements and test methods
EN 12520:2015Furniture - Strength, durability, and safety - Requirements for domestic seating
EN 12790:2009Child use and care articles - Reclined cradles
EN13209- 1:2021Child care articles - Baby carriers - Safety requirements and test methods - Part 1: Framed back carriers
EN13209-2:2015Child care articles Baby carriers-Safety requirements and test methods Part 2: Soft carrier
EN 13210- 1:2020Child care articles - Part 1: Children's harnesses, reins -Safety requirements and test methods
EN 13210-2:2020Child care articles - Part 2: Children's harnesses incorporating backpacks and reins - Safety requirements and test methods
EN 14036:2003Child use and care articles- Baby bouncers - Safety requirements and test methods
EN 14988:2017+A1:2020Children's highchairs - Requirements and test methods
EN 16120:2012+A2:2016Child use and care articles-Chair mounted seat
EN 16232:2013+A1:2018Child use and care articles-Infant swings
EN 50294Measurement Method of Total Input Power of Ballast-Lamp Circuits
IEC 60081Double-capped fluorescent lamps - Performance specifications
IEC 60529Degrees of protection provided by enclosures (IP Code)
IEC 60598- 1Luminaires - Part 1: General requirements and tests
IEC 60598-2-3Luminaires - Part 2-3: Particular requirements -Luminaires for road and street lightings
IEC 60901Single-capped fluorescent lamps - Performance specifications
IEC 60921Ballasts for tubular fluorescent lamps - Performance requirements
IEC 61000-3-2Electromagnetic compatibility (EMC) - Part 3-2: Limits -Limits for harmonic current emissions (equipment input current ≤16 A per phase)
IEC 61000-3-2Lamp power factor (only for lamps with integrated controlgear)
IEC 61140Protection against electric shock - Common aspects for installation and equipment
IEC 61547Equipment for general lighting purposes - EMC immunity requirements
IEC 61643-11Low-voltage surge protective devices - Part 11: Surge protective devices
connected to low-voltage power systems - Requirements and test methods
IEC 62262Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
IEC 62384DC or AC supplied electronic control gear for LED modules - Performance requirements
IEC 62471Specific effective UV radiant power
IEC 62612Self-ballasted LED lamps for general lighting services with supply voltages > 50 V – Performance requirements
IEC 62717LED modules for general lighting - Performance requirements
IEC 62722-1Luminaire performance - Part 1: General requirements
IEC 62722-2-1Luminaire performance - Part 2- 1: Particular requirements for LED luminaires
IEC/TR 61341Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
IES LM-9Electrical and Photometric Measurements of Fluorescent Lamps
IES LM-10Photometric Testing of Outdoor Fluorescent Luminaires
IES LM-41Photometric Testing of Indoor Fluorescent Luminaires
IES LM-66Electrical and Photometric Measurements of Single-Based Fluorescent Lamps
IES LM-79Electrical and Photometric Measurements of Solid-State Lighting Products
IES LM-80Measuring Luminous Flux and Color Maintenance of LED Packages, Arrays and Modules
IES LM-82Characterization of LED Light Engines and LED Lamps for Electrical and Photometric Properties as a Function of Temperature
IES LM-84Measuring Luminous Flux and Color Maintenance of LED Lamps, Light Engines, and Luminaires
IES TM-21Projecting Long Term Lumen Maintenance of LED Light Sources
IES TM-28Projecting Long-Term Luminous Flux Maintenance of LED Lamps and Luminaries
ISO 4628-2Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance   — Part 2: Assessment of degree of blistering
ISO 4628-4Paints and varnishes — Evaluation quantity and size of defects, and of — Part 4: Assessment of degree ofof degradation of coatings — Designation of intensity of uniform changes in appearance   cracking
ISO 8098:2014Cycles-Safety requirements for bicycles for young children
ISO 9221-1:2015Furniture - Children's highchairs -Part 1: Safety requirements
ISO 9221-2:2015Furniture - Children's highchairs -Part 2: Test methods
ISO 9227Corrosion tests in artificial atmospheres -- Salt spray tests
ISO 10289Methods for corrosion testing of metallic and other inorganic coatings on   metallic substrates — Rating of test specimens and manufactured articles subjected to corrosion tests
ISTMTIn-SITU Temperature Measurement Testing (ISTMT)
L2(AP)005Cone luminous flux
prEN 13032-4Light and lighting - Measurement and presentation of photometric data of lamps and luminaires Part 4: LED light sources and luminaires
SASO 2870Energy Efficiency, Functionality and Labeling Requirements for Lighting Products – Part 1
SASO 2902Energy Efficiency, Functionality and Labelling Requirements for Lighting Products - Part 2
SASO 2927Energy Efficiency Functionality and Labelling Requirements for Lighting Products - Part 3: Street lighting
SASO EN 13032-4Light and lighting - Measurement and presentation of photometric data of lamps and luminaires Part 4: LED light sources and luminaires
SASO GSO IEC 60901Single-capped fluorescent lamps - Performance Standard
SASO GSO IEC 60969CFLi Performance requirements
SASO IEC 62554Basics of luminous flux
SASO IEC/PAS 62707- 1LED - Binning - Part 1: General requirements and white grid
SASO IEC/PAS 62717LED Modules Performance specifications
SASO IEC/TS 62504General lighting – LEDs and LED modules – Terms and definitions
SASO standard to be adopted(Project IEC 62663-2)Non-ballasted LED lamps – Performance Requirements based on
SOR/2016- 152Cradles and Bassinets Regulations
SOR/2016- 167Carriages and Strollers Regulations
回复

使用道具 举报

说点什么

您需要登录后才可以回帖 登录 | 立即注册
HOT • 推荐